{"product_id":"qts-ez-nylon-no-enclosure-nylon-filament","title":"QTS EZ Nylon Filament | Ultra-Low Warping PA6\/66 | No Enclosure Needed","description":"\u003ch2\u003eIndustrial-Grade Nylon Without the Usual Warping Headache.\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQTS EZ Nylon\u003c\/strong\u003e is a PA 6\/66 copolyamide filament engineered for dependable printing of durable, functional nylon parts. Its Nucleating Technology reduces crystallization shrinkage to just \u003cstrong\u003e0.6%-0.8%\u003c\/strong\u003e, helping large and flat parts stay stable on open-frame printers without making an enclosure mandatory.\u003c\/p\u003e\u003cp\u003eEZ Nylon provides a practical balance of toughness, layer adhesion and chemical resistance for engineers, product developers and serious makers who need more from their FDM parts.\u003c\/p\u003e\u003ch3\u003eKey Advantages\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-low warping:\u003c\/strong\u003e 0.6%-0.8% shrinkage helps reduce thermal stress and edge lift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo enclosure required:\u003c\/strong\u003e Suitable for successful printing on compatible open-frame machines, including Bambu Lab A1 and Prusa printers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong layer adhesion:\u003c\/strong\u003e Supports structural parts that need reliable interlayer bonding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial material properties:\u003c\/strong\u003e PA 6\/66 copolyamide provides resistance to oils, chemicals and common industrial environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMechanical Properties\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase Material\u003c\/td\u003e\n\u003ctd\u003ePA 6\/66 Copolyamide\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength (X-Y)\u003c\/td\u003e\n\u003ctd\u003e65MPa\u003c\/td\u003e\n\u003ctd\u003eISO 527 \/ GB 1040\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at Break\u003c\/td\u003e\n\u003ctd\u003e100%-120%\u003c\/td\u003e\n\u003ctd\u003eISO 527 \/ GB 1040\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Strength\u003c\/td\u003e\n\u003ctd\u003e70-85MPa\u003c\/td\u003e\n\u003ctd\u003eISO 178 \/ GB 9341\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact Strength, Izod\u003c\/td\u003e\n\u003ctd\u003e10-15kJ\/m²\u003c\/td\u003e\n\u003ctd\u003eISO 180 \/ GB 1843\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat Deflection Temperature (0.45 MPa)\u003c\/td\u003e\n\u003ctd\u003e90-100°C\u003c\/td\u003e\n\u003ctd\u003eISO 75 \/ GB 1634\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelting Point\u003c\/td\u003e\n\u003ctd\u003e196°C\u003c\/td\u003e\n\u003ctd\u003eISO 11357\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.08g\/cm³\u003c\/td\u003e\n\u003ctd\u003eISO 1183 \/ GB 1033\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelt Flow Index\u003c\/td\u003e\n\u003ctd\u003e12-17 at 230°C \/ 2.16kg\u003c\/td\u003e\n\u003ctd\u003eISO 1133\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage\u003c\/td\u003e\n\u003ctd\u003e0.6%-0.8%\u003c\/td\u003e\n\u003ctd\u003eISO 294\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eRecommended Printing Parameters\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle\u003c\/th\u003e\n\u003ctd\u003e240-260°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed\u003c\/th\u003e\n\u003ctd\u003e80-90°C; start at 80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeed\u003c\/th\u003e\n\u003ctd\u003e40-100mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCooling\u003c\/th\u003e\n\u003ctd\u003e0%-10%; off for the first three layers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed Adhesion\u003c\/th\u003e\n\u003ctd\u003ePVP glue stick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying\u003c\/th\u003e\n\u003ctd\u003e65-75°C for at least 12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eProfessional Usage Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep it dry:\u003c\/strong\u003e Nylon absorbs moisture readily. Dry the spool before printing and use dry storage for consistent surfaces and mechanical performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse an external feeder:\u003c\/strong\u003e Bambu Lab AMS is not recommended for this nylon's smooth surface. Feed from an external spool holder directly to the extruder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse PVP glue stick:\u003c\/strong\u003e Apply an appropriate adhesion layer before printing and tune settings for your individual printer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRecommended Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDrone frames, RC components and lightweight structural parts.\u003c\/li\u003e\n\u003cli\u003eIndustrial gears, bushings and wear-resistant mechanical components.\u003c\/li\u003e\n\u003cli\u003eLiving hinges, snap-fit parts and functional prototypes.\u003c\/li\u003e\n\u003cli\u003eConnectors, fixtures and workshop tooling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs an enclosure mandatory?\u003c\/strong\u003e\u003cbr\u003eNo. EZ Nylon is designed for low-warp printing and can be used on compatible open-frame printers, although an enclosure can still improve consistency in challenging environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use Bambu Lab AMS?\u003c\/strong\u003e\u003cbr\u003eIt is not recommended. Use an external spool holder and feed the filament directly to the extruder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to dry it?\u003c\/strong\u003e\u003cbr\u003eYes. For the best performance, dry EZ Nylon at 65-75°C for 12 or more hours before printing.\u003c\/p\u003e","brand":"QTS USA LLC","offers":[{"title":"White","offer_id":43109762662471,"sku":null,"price":42.99,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":43109764825159,"sku":null,"price":42.99,"currency_code":"USD","in_stock":false},{"title":"Gray","offer_id":43109764857927,"sku":null,"price":42.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/3741\/4727\/files\/s122167829430437215_p46_i1_w895.jpg?v=1787103318","url":"https:\/\/www.qtsusabiz.com\/products\/qts-ez-nylon-no-enclosure-nylon-filament","provider":"QTS USA LLC","version":"1.0","type":"link"}