QTS Flexible 25A UV Resin | Rubber-Like 405nm Resin | 500g
Soft-Touch Rubber Feel. Reliable Elastic Rebound.
QTS Flexible 25A UV Resin is a high-resilience, rubber-like 405nm photopolymer for functional elastic parts. Its Shore 25A softness delivers a comfortable tactile feel, while the resilient formulation returns to shape after repeated bending and compression.
Developed and manufactured in Taiwan, this 500g flexible resin gives engineers, designers and makers a practical balance between softness, tear resistance and printability for prototypes that need to behave more like final rubber components.
Key Advantages
- Elastic snap-back performance: Designed for parts that must recover their original form after compression or repeated flexing.
- Rubber-like Shore 25A feel: A softer material profile for buttons, seals, protective pads and user-facing interfaces.
- High elongation: 270%-340% elongation at break helps parts withstand dynamic use.
- Design freedom: Create integrated buttons, lattice cushions, complex gaskets and other geometry that is difficult to manufacture by molding during prototyping.
Recommended Applications
- Functional prototypes, soft-touch buttons, non-slip feet and soft-grip handles.
- Custom seals, dust-protection gaskets and fluid-management components.
- Drone dampeners, robotics bumpers and shock-absorbing parts.
- Wearable device prototypes, ergonomic pads and flexible protective inserts.
- RC tires, flexible props and anatomical education models.
Technical Specifications
| Compatibility | 395nm-405nm LCD, DLP and SLA printers |
|---|---|
| Shore Hardness | 25A, soft rubber-like |
| Elongation at Break | 270%-340% |
| Tensile Strength | 2.0-3.0 MPa |
| Viscosity | 70-100 cps at 25°C |
| Color | Yellow, translucent |
| Net Weight | 500g |
Printer Compatibility
Compatible with professional 405nm printers, including the Anycubic Photon series, Elegoo Mars and Saturn series, Phrozen Sonic series, Creality Halot series and Miicraft DLP printers. Always validate exposure and support settings on your specific printer before production use.
Best-Practice Printing & Post-Processing
- Shake the bottle thoroughly for 1-2 minutes before use.
- Use sufficient supports and slower lift speeds to accommodate the material's elasticity during peeling.
- Wash printed parts promptly with 95% IPA or a dedicated resin cleaner.
- Post-cure with 365-405nm UV light for 10-30 minutes, starting at 10 minutes and checking the result. Validate the curing time for your curing unit and part geometry; excessive post-curing can reduce the material's flexibility.
Frequently Asked Questions
How is Flex 25A different from Flex 8A?
Flex 8A is ultra-soft and silicone-like. Flex 25A is firmer, with a soft-rubber feel and stronger elastic rebound for buttons and structural gaskets.
Can it be painted?
Yes. Use flexible paints or dyes; ordinary rigid coatings can crack when the part bends.
Can it be used for waterproof seals?
When fully cured and designed appropriately for the intended application, the material is suitable for custom soft gaskets and seals. Validate all fluid-contact and performance requirements in your own application.