QTS PLA-Stone | Realistic Stone Texture 3D Printing Filament | 1kg
Authentic Stone Texture, Straight From the Print Bed.
QTS PLA-Stone is a specialty PLA filament formulated to create a realistic, rough stone surface without painting or post-processing. It gives models an organic, natural finish that is well suited to reptile habitats, tabletop terrain, architectural mock-ups and decorative printing.
With six natural stone-inspired colors, a controlled 1.75mm filament diameter, and a printability-focused formulation, PLA-Stone helps makers achieve texture-rich results with a dependable FDM workflow.
Why Choose PLA-Stone?
- Natural stone texture: Creates a rough, mineral-like surface that reduces the plastic appearance of standard filament.
- Built for creative environments: An excellent choice for reptile enclosure scenery, D&D and tabletop terrain, sculpture bases and architectural landscapes.
- Six natural colors: Dark Gray, Light Gray, Beige, Red Gray, Green Gray and Bee White.
- Controlled extrusion: 1.75mm ±0.05mm filament diameter and recommended nozzle sizes from 0.4mm to 0.6mm.
Basic Specifications
| Material | PLA |
|---|---|
| Filament Diameter | 1.75mm ±0.05mm |
| Net Weight | 1kg |
| Filament Length | 340-345m |
| Spool Dimensions | 200mm diameter × 60mm height; 58mm inner diameter; 140g spool |
Mechanical Properties
| Property | Value | Test Standard |
|---|---|---|
| Tensile Strength (X-Y) | 15 MPa | ISO 527 |
| Tensile Modulus (X-Y) | 235 MPa | ISO 527 |
| Elongation at Break | 235% | ISO 527 |
| Flexural Strength (X-Y) | 21 MPa | ISO 178 |
| Flexural Modulus (X-Y) | 320 MPa | ISO 178 |
| Impact Strength (X-Y) | 70.3 kJ/m² | ISO 180 |
| Heat Distortion Temperature | 65°C | ASTM D648 |
| Melt Flow Index | 32-36g/10min | ISO 1133 |
Recommended Printing Parameters
| Drying | 50°C for 5 hours |
|---|---|
| Storage | Below 40% relative humidity; store cool, ventilated and away from direct sun |
| Nozzle Size | 0.4-0.6mm |
| Nozzle Temperature | 220-260°C; 240°C recommended; up to 260°C for high speed |
| Bed Temperature | 70-80°C; 75°C recommended |
| Cooling Fan | On throughout printing |
| Print Speed | 50-200mm/s; 150mm/s recommended |
| Max. Overhang | 55° |
| Max. Bridge Distance | 10mm |
Application Ideas
- Reptile enclosure backgrounds, rock hides and terrain features.
- D&D, tabletop wargaming, model railroading and diorama landscapes.
- Architectural models, decorative planters, sculpture bases and display pieces.
FAQ
Does PLA-Stone require post-processing to look like stone?
No. The texture is built into the formulation and appears directly from the printer.
Is it suited to high-detail terrain?
Yes. Use a 0.4mm nozzle for finer terrain features or a 0.6mm nozzle for faster, more rugged forms.
How should it be stored?
For the best print quality, keep it below 40% RH and dry at 50°C for five hours when needed.