QTS High-Speed PLA Metal Series (1.75mm) - Premium Metallic Luster | Optimized for Bambu Lab & High-Speed Printing | 1kg
Elevate your prints with the stunning brilliance of the QTS High-Speed PLA Metal Series. Engineered for modern high-speed 3D printers, this filament maintains a consistent, high-gloss metallic finish even at speeds up to 300mm/s. Perfect for trophies, jewelry prototypes, and high-end decorative pieces, it offers exceptional layer adhesion and a smooth, clog-free experience. Now available in a full 1kg spool.
QTS High-Speed PLA Metal — Extreme Brilliance at 600mm/s
Redefine what's possible with metallic 3D printing. The QTS High-Speed PLA Metal Series is engineered for the next generation of ultra-fast 3D printers. While traditional metallic filaments often suffer from clogging or loss of luster when pushed to high speeds, QTS Metal maintains a consistent, high-gloss brilliance even at staggering speeds of up to 600mm/s. Achieve a premium, jewelry-like finish with the efficiency of modern high-speed motion systems.
Why QTS High-Speed Metal?
Ultra-High Speed Performance: Specifically formulated to handle flow rates required for printing speeds between 150mm/s and 600mm/s, with a recommended sweet spot at 300mm/s.
Superior Overhang & Bridging: Engineered for precision, supporting a maximum overhang angle of 55 degrees and a bridging distance of up to 20mm without sagging.
Bambu Lab & Voron Ready: The perfect companion for high-acceleration printers. Experience flawless metallic surfaces on your Bambu Lab X1/P1/A1 or Voron builds.
Key Advantages
- ✔Premium Metallic Luster: High-density metallic pigments provide a realistic, shimmering finish that hides layer lines.
- ✔Clog-Free Reliability: Optimized melt flow index ensures smooth extrusion through 0.2mm, 0.4mm, and 0.6mm nozzles.
- ✔Exceptional Layer Adhesion: Maintains structural integrity even at extreme speeds.
- ✔Eco-Friendly Base: Crafted from high-purity, biodegradable PLA resin.
Recommended Parameter Settings
| Parameter | Specification |
|---|---|
| Printing Speed | 150 ~ 600 mm/s (Recommended: 300 mm/s) |
| Nozzle Temperature | 190 ~ 230°C |
| Heated Bed Temperature | 45 ~ 60°C |
| Nozzle Size Compatibility | 0.2 / 0.4 / 0.6 mm |
| Maximum Overhang Angle | 55 Degrees |
| Maximum Bridging Distance | 20 mm |
| Cooling Fan | On |
Storage & Maintenance
- Drying Conditions: For best results, dry at 50°C for 8 hours before use.
- Storage Environment: Keep in a dry environment with humidity < 40% RH.
- Packaging: Each 1kg spool is vacuum-sealed with desiccant to ensure peak performance.
Applications & Use Cases
Frequently Asked Questions (FAQ)
Q: Does it require a hardened nozzle? A: No, QTS Metal PLA is non-abrasive and safe for standard brass nozzles.
Q: How do I maximize the metallic gloss? A: Printing at the higher end of the temperature range (220°C+) and ensuring proper cooling will enhance the shimmering effect.
|
| ||