QTS Magic Spray - Professional 3D Printing Bed Adhesive | Anti-Warping & High-Strength Build Plate Glue | 50ml
Eliminate warping and bed adhesion issues forever with QTS Magic Spray. This professional-grade 3D printing adhesive is specifically formulated to keep your prints firmly attached to the build plate during the entire printing process. Whether you are using PLA, ABS, PETG, or Nylon, Magic Spray provides a reliable bond on glass, PEI, and spring steel surfaces. Its "Magic" formula ensures a rock-solid hold when the bed is hot and an effortless release once it cools down.
QTS Magic Spray — The Ultimate Solution for Bed Adhesion
Stop struggling with warping and detached prints. QTS Magic Spray is a high-performance adhesive designed to ensure your 3D prints stay exactly where they belong: firmly on the build plate. Engineered for both hobbyists and professionals, this spray provides a consistent, reliable bond for a wide range of materials, ensuring your long-duration prints finish successfully every time.
Why is it "Magic"?
Temperature-Activated Bond: Magic Spray creates a powerful adhesive bond when the build plate is heated. As the print finishes and the bed cools down, the bond naturally weakens, allowing you to remove your models with a simple touch—no scrapers required.
Universal Material Support: From standard PLA to challenging materials like ABS, PETG, ASA, and even Nylon, Magic Spray provides the necessary grip to prevent corner lifting and warping.
Easy Clean-Up: Unlike glue sticks or tapes, Magic Spray leaves a thin, even film that is water-soluble. Simply wipe your build plate with a damp cloth to keep it pristine.
Key Advantages
- ✔Zero Warping: Keeps corners flat and prevents models from detaching mid-print.
- ✔Smooth Bottom Surface: Provides a clean, professional finish to the first layer of your prints.
- ✔Cost-Effective: A single 50ml bottle provides hundreds of applications. A light mist is all you need.
- ✔Multi-Surface Compatibility: Works perfectly on Glass, PEI sheets, Spring Steel, and Aluminum plates.
Applications & Use Cases
How to Use - Best Practices
- Clean: Ensure the build plate is clean and free of old adhesive or oils.
- Shake: Shake the bottle well before use.
- Spray: Hold the bottle 15-20cm away and apply a thin, even mist over the printing area while the bed is cool or slightly warm.
- Heat: Heat the bed to your filament's recommended temperature. The spray will become tacky and ready for printing.
- Cool & Release: After the print is finished, wait for the bed to cool below 30°C. The model will pop off easily.
Technical Specifications
| Property | Details |
|---|---|
| Volume | 50ml |
| Adhesive Type | Water-Soluble Polymer |
| Compatible Materials | PLA, ABS, PETG, ASA, Nylon, TPU, etc. |
| Bed Temp Range | 40°C - 110°C |
Frequently Asked Questions (FAQ)
Q: Do I need to spray before every print? A: Not necessarily. For PLA, a single application can often last for 3-5 prints. For high-warp materials like ABS, we recommend a fresh light mist.
Q: How do I remove the residue? A: Magic Spray is water-soluble. Simply use a damp cloth or wash the plate under warm water.
Safety & Storage
Store in a cool, dry place away from direct sunlight. Keep out of reach of children. Do not spray near open flames or while the printer is actively heating to extreme temperatures.