QTS EZ Nylon Filament | Ultra-Low Warping PA6/66 | No Enclosure Needed
Industrial-Grade Nylon Without the Usual Warping Headache.
QTS EZ Nylon is a PA 6/66 copolyamide filament engineered for dependable printing of durable, functional nylon parts. Its Nucleating Technology reduces crystallization shrinkage to just 0.6%-0.8%, helping large and flat parts stay stable on open-frame printers without making an enclosure mandatory.
EZ Nylon provides a practical balance of toughness, layer adhesion and chemical resistance for engineers, product developers and serious makers who need more from their FDM parts.
Key Advantages
- Ultra-low warping: 0.6%-0.8% shrinkage helps reduce thermal stress and edge lift.
- No enclosure required: Suitable for successful printing on compatible open-frame machines, including Bambu Lab A1 and Prusa printers.
- Strong layer adhesion: Supports structural parts that need reliable interlayer bonding.
- Industrial material properties: PA 6/66 copolyamide provides resistance to oils, chemicals and common industrial environments.
Mechanical Properties
| Property | Value | Test Method |
|---|---|---|
| Base Material | PA 6/66 Copolyamide | - |
| Tensile Strength (X-Y) | 65MPa | ISO 527 / GB 1040 |
| Elongation at Break | 100%-120% | ISO 527 / GB 1040 |
| Flexural Strength | 70-85MPa | ISO 178 / GB 9341 |
| Impact Strength, Izod | 10-15kJ/m² | ISO 180 / GB 1843 |
| Heat Deflection Temperature (0.45 MPa) | 90-100°C | ISO 75 / GB 1634 |
| Melting Point | 196°C | ISO 11357 |
| Density | 1.08g/cm³ | ISO 1183 / GB 1033 |
| Melt Flow Index | 12-17 at 230°C / 2.16kg | ISO 1133 |
| Shrinkage | 0.6%-0.8% | ISO 294 |
Recommended Printing Parameters
| Nozzle | 240-260°C |
|---|---|
| Bed | 80-90°C; start at 80°C |
| Speed | 40-100mm/s |
| Cooling | 0%-10%; off for the first three layers |
| Bed Adhesion | PVP glue stick |
| Drying | 65-75°C for at least 12 hours |
Professional Usage Notes
- Keep it dry: Nylon absorbs moisture readily. Dry the spool before printing and use dry storage for consistent surfaces and mechanical performance.
- Use an external feeder: Bambu Lab AMS is not recommended for this nylon's smooth surface. Feed from an external spool holder directly to the extruder.
- Use PVP glue stick: Apply an appropriate adhesion layer before printing and tune settings for your individual printer.
Recommended Applications
- Drone frames, RC components and lightweight structural parts.
- Industrial gears, bushings and wear-resistant mechanical components.
- Living hinges, snap-fit parts and functional prototypes.
- Connectors, fixtures and workshop tooling.
FAQ
Is an enclosure mandatory?
No. EZ Nylon is designed for low-warp printing and can be used on compatible open-frame printers, although an enclosure can still improve consistency in challenging environments.
Can I use Bambu Lab AMS?
It is not recommended. Use an external spool holder and feed the filament directly to the extruder.
Do I need to dry it?
Yes. For the best performance, dry EZ Nylon at 65-75°C for 12 or more hours before printing.