QTS Magic Spray | 3D Printing Bed Adhesive for Warp Control | 50ml
More Reliable First Layers for Demanding 3D Prints.
QTS Magic Spray is a 50ml build-plate adhesive for 3D-printing workflows that need stronger first-layer grip and reduced corner lift. Apply a light, even coating to a compatible build surface, heat the bed for your chosen material, and allow the part to release after the bed cools.
It is positioned for compatible PLA, ABS, PETG, ASA, Nylon, TPU, and other FDM workflows on suitable glass, PEI, spring-steel, and aluminum build surfaces. Always test on a small area and follow your printer and build-surface manufacturer guidance.
Why Use Magic Spray?
- Warp-control workflow: Helps improve build-plate grip on shapes that tend to lift at corners.
- Temperature-responsive release: Designed to hold during the heated print process and release more easily as the bed cools.
- Multi-material focus: Supports compatible PLA, ABS, PETG, ASA, Nylon, and TPU workflows.
- Multi-surface focus: Intended for compatible glass, PEI, spring-steel, and aluminum build surfaces.
- Water-soluble cleanup: The published formula is intended for cleanup with a damp cloth or warm water.
Suggested Applications
- Large flat parts prone to corner lift
- Long-duration prints and higher-acceleration workflows
- ABS, ASA, Nylon, and other higher-warp material profiles
- Small-footprint models, supports, and delicate miniatures
- Functional FDM prototypes requiring stable first-layer adhesion
How to Use
- Start with a clean, cool or slightly warm compatible build plate.
- Shake the bottle, then apply a light and even mist from approximately 10–15 cm away.
- Heat the bed to the temperature recommended for your filament and printer profile.
- Print as usual and allow the bed to cool before removing the part.
- Clean residue with a damp cloth or warm water as appropriate for the build surface.
Avoid heavy application. The best amount depends on the material, print geometry, build surface, and bed temperature. For PLA, one application may support multiple prints; for higher-warp materials, assess the surface before each print.
Product Details
| Volume | 50ml |
|---|---|
| Adhesive Type | Water-soluble polymer formula |
| Compatible Material Workflows | PLA, ABS, PETG, ASA, Nylon, TPU, and more |
| Compatible Surfaces | Glass, PEI, spring steel, aluminum |
| Published Bed Temperature Range | 40–100°C |
Safety, Storage, and Fulfillment Review
Store in a cool, dry place away from direct sunlight. Keep away from children and open flames. Do not spray near an actively heating printer. Follow all product-label precautions. Shipping, storage, and carrier eligibility must be reviewed and approved by QTS USA before this Draft product is activated for sale.
Build a More Reliable Printing Workflow
Pair consistent surface preparation with a calibrated first layer and a material profile suited to your print. For high-speed PLA projects, explore QTS High-Speed PLA Classic. Browse QTS Filaments for additional FDM materials.